PDR Car body dent removal tools set Paintless Dent Repair tool kit yellow line Reflector glue gun slide hammer hand tool kit

All the product you will receive: total 69 pieces

How to use PDR paintless dent repair kits?
 
1. Clean the dent with a clean wet cloth (you can use the yellow line board to confirm the dent)
2. Mount the glue stick into the glue gun, pull the trigger to let the glue stick enter into the glue gun, connect the power source and preheat for 5 minutes
3. Use a proper drawing gasket. Large dent requires a large drawing gasket.
4. Pull the trigger and apply the drawing gasket with extruded glue
5. Fast place the drawing gasket with hot melt glue at the center of dent, press lightly until the glue cures and adheres (Let the glue cool for about 8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter)
6. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent
7. Check with a Line board. If dent still exists, knock it slightly with a flattening hammer or pen
8. Clean the repaired place with a clean wet cloth.

Use alcohol can remove glue

If the surface after repair has raised point, you can use the tap down pen & rubber hammer presses the bump:

​

ultradent, dent puller, pdr tools, paintless dent repair tools, dent removal tools, car dent puller, paintless dent removal tools, ultradent products, pdr training, dent tools, pro pdr solutions, small dent puller, dentrix training, paintless dent, dent repair tools, dent gear, ultradent jobs, dent pullers, pdr finesse, dent tool company, glue dent puller